How to reset a BIOS password on a machine? This process can be tricky as the password is set by the manufacturer most of the times. In such a situation, it is always suggested to contact the BIOS manufacturer to see if they use a standard password. However, if you have modified the password, the process of how to reset BIOS password can be a cakewalk.
Read on to learn the three simple methods that will make the task of hardware networking easier.
The importance of a BIOS or CMOS password
A BIOS password is a security measure that can be used to stop a person from powering up a computer system or deliberately making changes in some of the computers most sensitive areas. All the big computer manufacturers usually lock this function because they are afraid that people may change something and potentially damage the machine. If a technician or hardware enthusiast needs to make changes in the system, they will have to access the BIOS.
These BIOS passwords are used to add some extra security to computers. You can either set a password to prevent access to BIOS settings or avoid the PC from booting. Sometimes, this additional security might be troublesome when you forget the BIOS password or someone changes your system BIOS password intentionally. If something of that sort ever occurs, there is no need to worry. You can use the below options that teach you how to reset BIOS password.
Reset from within BIOS
The BIOS password is saved in a non-volatile memory, which can be cleared, and the password can be removed too! The chip is located on the motherboard. You must be wondering how to reset the BIOS password from within for an efficient hardware networking? You can do it by accessing your BIOS.
First, just turn on your system and press the concerned key to enter the BIOS. Most of the manufacturers use different function keys like F1, F2, F3 or F10. Some systems also use the delete (DEL) key. If you are using Windows 8 with a UEFI motherboard, you may not have access to a general BIOS screen. So, how to reset the BIOS password? You can still go ahead with the process, but instead will need to use the Advanced Boot Menu. If you cannot access your BIOS because it gets locked out with a password or corrupted, use one of the below methods:
Use the ‘Factory Reset’ option
Your computer stores low-level settings such as the system time and hardware configurations in its CMOS. These settings are configured in the BIOS setup menu. Your computer stores different types of settings like the system time and hardware settings in its CMOS. This can also play a vital part in how you reset BIOS password or carry out hardware networking. These settings are already incorporated into the BIOS setup menu.
In terms of a hardware compatibility issue or another problem, it is suggested that you may try clearing the CMOS. You need to find the factory reset option to carry out this process. Clearing the CMOS resets your BIOS settings and puts it back in the default state. In most cases, you can remove the CMOS from within the BIOS menu. In some instances, you may have to open your computer’s case. If you load the factory defaults, it will provide the option to change and choose the new password.
If you wish to use the BIOS Menu, then you can access it by restarting your computer and pressing the key that appears on your screen. It is mostly the Delete or F2 key to access the setup menu. If you are not able to see a key displayed on your screen then consult your computer’s manual. Remember that different computers use different keys. So, if you set up your computer then make sure you consult your motherboard’s manual.
Within the BIOS, you can look for the Reset option. It may be named Clear BIOS settings, Reset to default, Load factory defaults, Load setup defaults, or something similar. Then you can select it with your arrow keys, press Enter, and confirm the operation. Your BIOS will now use its default settings. In case you have changed any BIOS settings in the past, you will have to change them again.
Reset the motherboard jumper
You can also change the BIOS password by resetting the motherboard jumper. A point to be noted is that almost all motherboards comprise of a jumper that can clear all CMOS settings simultaneously with the BIOS password. The position of this jumper varies depending upon the motherboard brand. You must read your motherboard manual to cross-check its location. The process of hardware networking can be confusing at times but can be easy if done correctly.
It is crucial to realize that most motherboards have dozens of diverse jumpers. So, ensure that you are changing the correct one. If you are unable to find the password jumper, then refer to your motherboard’s documentation by looking into the manual or downloading it from the manufacturer’s website.
The majority of motherboards feature a jumper that can be used to reset CMOS settings to provide access to the BIOS. This hardware networking process is particularly useful if the BIOS are password-protected, and you do not know the password. You can promptly find the location of the jumper in the manual, which is present near the CMOS battery. It is mostly named CLEAR, CLR CMOS, PASSWORD, or CLR PWD.
Set the jumper to the “clear” position, put the power on of your computer, turn it off again, and set the jumper to the original position. Yes, it is as easy as that.
Once the appropriate jumper has been located and toggled, then the password should be cleared. You can turn on the machine to verify if the password has been reset. Once removed, turn the computer off and once again return the jumper or dip switch to its original position.
It is always recommended to discuss this topic with hardware professionals to avoid mistakes. You can use any of these three simple methods and know how to reset the BIOS password accurately.